One of the best zero-turn mowers for slopes on the market with steering wheel control. Ample horsepower and dual-wheel traction mean this slope mower can handle up to a 46% grade.
Tackle inclines confidently with this zero-turn slope mower. It cuts straight lines on slopes up to 25 degrees.
- A powerful slope mower with 35 HP Kawasaki FX1000v (999cc) engine and 16cc Parker HTG transmission
- 72" triple-7-gauge fabricated steel cutting deck with top, bottom and side reinforcements
- 3-year limited commercial warranty (no hour limitations) and 5 year / 1,750 hour limited deck construction warranty
Engine Brand |
Kawasaki® |
Engine Model |
FX Series |
Engine Model Number |
1000V |
Engine Displacement |
999cc |
Engine Output |
35HP |
Fuel Tank Capacity |
Dual 7.45 gal. US (28.2 L) |
Cylinders |
Twin |
Engine Start |
Ignition Key |
Engine Oil Capacity |
2.0 qt. US (1.89 L) |
Lubrication |
Fully pressurized |
Charging System |
15 amp regulated |
Fuel Gauge |
Electronic |
Choke |
Separate Choke |
Air Filter |
High Density |
Oil Filter |
Yes |
Fuel Delivery |
Carburetor |
Transmission |
Parker HTG 16cc pump / 310cc wheel motor |
Forward Speed |
14 mph / 22.5 km/h |
Reverse Speed |
6 mph / 9.5 km/h |
Deck Cutting Width |
72 in |
Deck Material |
fabricated 7ga. (.187") steel shell |
Deck Engagement (PTO) |
electronic fingertip engagement pto |
Deck Construction |
7ga. top plate 7ga. bottom reinforcement 1/4" rolled leading edge |
Spindle Construction |
8" sealed cast aluminum housing (maintenance-free) |
Blade(s) |
Triple-blade / High-lift blade (standard) Marbain Blade |
Cutting Height Range |
1" to 5" in 1/4" increments |
Anti-Scalping |
4 front deck gauge wheels |
Deck Positions |
Foot pedal with spring assist 16 Positions |
Deck Shell Warranty |
5 year / 1,750 hour limited deck construction warranty |
Commercial Warranty |
3 year / no hour limit commercial warranty |
Frame |
Fully welded, full-length 3/8 x 5" laser cut steel / integrated tie-down slots |
Front Axle |
Front Axle / Yokes 2" x 3" solid axle tube with ISO dampening suspension |
ROPS |
2" x 2" spring-latch tool-less foldable 3 position |
Bumper |
5/16" Thick Steel rear engine guard/pre-drilled mounting points for attachments with integrated rear hitch |
Yokes |
1/2" thick steel front yokes |
Cruise Control |
NA |
Brakes |
Hand-operated lever with integrated hydro pump release lever |
Steering Control |
High Performance Steering Wheel with electronic power steering & Foot-pedal Control |
Rear Tires |
25"x9"-12" HD Traction Tread |
Front Tires |
16"x6.5"-8"Kenda K505 |
Dimensions L/W/H |
88" L x 85" W x 49" H |
Weight (approx.) |
1850 lbs. |
Hour Meter |
Crew Boss |
Discharge Chute |
High-density, impact-resistant rubber |
Cup Holder |
Intergrated into Side Pod |
Model Number |
53TIHMUY050 |
Specifications Disclaimer |
Specifications subject to change without notice and without incurring obligation. Products depicted on website and other advertisements are for demonstration purposes only. Actual products offered for sale may vary in design, required attachments, safety features and non-functional appearance from. See other general disclaimers at the bottom of our website. |
Professional delivery and installation is available for every product we sell. We would be happy to coordinate delivery and installation for you.
Extended warranties are usually very inexpensive and can save you thousands in the future.
It's simple and inexpensive to purchase extended warranties and one of the smartest ways to protect your investment.
Lawn equipment
can be large, heavy and expensive. You probably don't have the special tools or expertise needed to fix them in a crisis. If you can spare a few thousand dollars without batting an eyelash for new
lawn equipment
should they break tomorrow, don't buy a warranty. But if you're like most of us, protect yourself by purchasing inexpensive extended warranties when you buy a new product and save yourself big money in the long run.